Articles on: Product Support

How do I use the GPS with the 4G LTE card?

Verify that 4G Module is enabled and active:

Turn on the machine and press F2 repeatedly (for tablets press A2 or touch the upper left corner on the screen).
Once in Bios, go to Advanced* Tab, select wireless configuration, and verify WWAN is set to enabled.
Go to Exit, Select Save values and reboot*, then press Enter twice (for tablets press Windows button twice).
Boot to Windows.
Open device manager, you can do this by typing in the bottom left search bar "device manager" (for tablets, touch the windows logo at the left side of the bar, hold it for 2 seconds and then release, then select "device manager" on the list).
Find "_network adapters_" and expand it by touching the arrow down.
Verify the EM7355 card is shown with a blue icon at its left side.
Find "_ports_" and expand it.
Verify port Sierra Wireless NMEA and Sierra Wireless DM* are available.

Using GPS with 4G LTE:

Open GPS viewer App (if you do not have this app installed please download it and install from the link below)

https://pc-dl.panasonic.co.jp/dl/docs/068292?dc%5B%5D=002001&no=63&p1=198&q=gps&score=0.488050550222397&sri=15501218&trn_org=2

Once GPS viewer is open, click on "scan" button and it will take some seconds until you start visualizing data from satellite.

Updated on: 01/02/2025

Was this article helpful?

Share your feedback

Cancel

Thank you!